ChaseDream

标题: [分享]DeltaKey加速817文件檔-自動化 [打印本页]

作者: yongchou    时间: 2003-7-6 00:08
标题: [分享]DeltaKey加速817文件檔-自動化

好不容易搞定了(聽加速後的聲音真是痛快, 112% you can choose in the procedure.)
有需要的可參考以下方法:( I assume that everybody has image burners like Nero...(,which you can later use to create the new iso).  

Download 3 tools and 2 small files I wrote(The last 2 are on ##第17樓 now.):
Transcribe6.0   http://www56.pair.com/sevenths/xscribe/transcribe600.exe
Macro Express    http://www.macros.com/download1/macex3.exe
RenameMaster    http://jackass.arsware.org/rmv236.zip
List.text  (all the 817filenames)-->lease DO put this in C:\ (otherwise,t.mex can't find it.)  
t.mex   (script for MacroEx to use)

1. a) Delta key (345M) --Copy all the files into a directory. (all CD material, not just wavs)
    b) Delta key slim(146M)--Copy all the files into a directory, and convert all those 817 *.WAV into 16bit WAV(or PCM wav).( Use http://www.dbpoweramp.com/dmc.htm or    Streambox ).
Keep the "Windows File Manager" maximized and opened to the SOUNDS directoy.(You can monitor the progress looking at its lower-left corner--shows file number.)

updated, May 3,2004(以下步驟我新整理了參考圖 http://yongcho.myweb.hinet.net/computer/script.htm Notice that for Delta to work normally, you have to eliminate the resulting "_COPY" in the filenames.



2. Run Transcribe, open "LA1-01.WAV" (MUST be this one, unless you can modify t.mex) , set the speed to 112%, click on Tools--Copy to file, check(打勾)the processing /Speed/Pitch/Tuning,
   press OK, a small box Yes or No---> presss NO --> File--Save as --press Save.

3. Double-Click the "t.mex" to run  Macro Express( already installed)

4. Back to Transcribe prgram, Press Ctrl+A -----Then leave the computer to do the speeding of the 817 files. (took about 50min on my Intel Celeron 790MHz)
##注意,Don't do other things on the same computer while processing. You can even turn off the monitor now, if you like.  [ After it finishes (you can tell by looking at the Windows File Manager to see if there are 1636 objects (818+new 817+ a .xsc) ) (or you can see the indicator light of the hard disk is no longer quickly flashing)  ,and it stops at a message box "Copy to file"-- showing something like .......\WPROB Copy.WAV -->ress Cancel. and Exit the program.  Right-click MacroEx in the system tray, Yes to stop the process.

5.  Delete or move away the old 817 .WAVs(those without _copy in their names).  Use RenameMster (或其他"改名"程序) , Click the most upper-left yellow button to select where the *_copy.WAVs are,  Click the tab "Remove" in the middle , mark  "from name" , then key in the box to the right " Copy"( Copy前一定要有一空白) .    Then "Rename", all the "_Copy" in the names should go now.

6. If you want it slim, don't forget to convert those WAVs back to "microsoft ADPCM 22000Hz,4bit,mono wav".

7. Delete the one .xsc , Use Nero etc. to creat the new ISO.

OK, and you should be Happy now

FAQ
1) After mounting the new iso and running Delta, it says "Can't find Deltakey CD..".

Ans.--> It's strange, because I tried today and I got the same problem as yours. This never happened before. I wonder if it's because we both have used the Delta over a time limit(30days, maybe). And it perhaps doesn't accept anything new.  But if you've still got the working old iso, I have a solution for you. Use "winiso5.3" to open the old one, move away those 817 wavs, then put in the new wavs. It worked for me.
Somehow, Winiso5.3 keeps sth(sector no.?) for the installed Delta to recognize.
--> http://www.winiso.com/down/WINISO.EXE
name:ttdown.com
code:03F82DBEBCD707B8D8F4E2E7B677E75D4A9D8CB6C3ABFC05













































[此贴子已经被作者于2004-5-3 9:38:09编辑过]

作者: lucyyyh    时间: 2003-7-6 01:27
youngchou兄弟真的佷厉害哦, pf,pf.
作者: 困难是弹簧    时间: 2003-7-6 09:33
佩服!
多谢!
作者: ustoday    时间: 2003-7-6 18:52
不好意思 要去哪裡的FTP下載你的小程式
作者: 困难是弹簧    时间: 2003-7-6 18:59
youngchou兄以传给管理员了,我想,他会尽快放在下载区的。

作者: yongchou    时间: 2003-7-6 19:50
Because my upload ability is pretty limited.(146MB took about a whole day the last time.)
And I don't know if everybody needs it.

So I hope maybe some manager of Chasedream could try it first.

If there's still difficulty, and many people need it, I'll upload the compressed SOUNDS folder(66.7MB rar).


作者: yongchou    时间: 2003-7-7 09:14
For those 2 small files, if you don't to wait for the manager's announcement, please leave your e-mail ,and I'll send them to you.(only 11KB + 4KB)
作者: yongchou    时间: 2003-7-7 13:10
标题: <2個小文件下載>
在下無知
迄今始察覺小文件可以貼於版上
1. list.txt(需置於c:/)
2. t.mex
見後面
[此贴子已经被作者于2003-7-7 15:22:16编辑过]

作者: ustoday    时间: 2003-7-7 14:08
sorry yongchou~~
你貼在上面的連結好像不能打開喔
作者: ustoday    时间: 2003-7-7 14:19
能不能e-mail給我
快要考試了
好急!!
ustoday23(A) hotmail.com
作者: yongchou    时间: 2003-7-7 14:58
已經e-mail
上面確實不行(I have to tell Zeros.)
作者: yongchou    时间: 2003-7-7 15:25
刪除
[此贴子已经被作者于2003-7-7 17:36:27编辑过]

作者: 困难是弹簧    时间: 2003-7-7 16:07
yongchou兄弟,对不起,管理员这几天很忙,可能来不及把你传的东东拿出来。
呵呵,偶也没法享用你那个好东东。
作者: yongchou    时间: 2003-7-7 17:39
再upload更正版
刪除,
請到17 樓
[此贴子已经被作者于2003-7-15 13:34:39编辑过]

作者: chenxiang1974    时间: 2003-7-11 12:44
可不可以也请 yongchou  
email我一份
emial:chenxiang@mail.edu.cn

作者: yongchou    时间: 2003-7-11 21:50
OK

作者: yongchou    时间: 2003-7-12 15:26
标题: [公告]最新最佳效果版本-- t.mex
[attach]1891[/attach]

[此贴子已经被作者于2004-5-3 9:39:24编辑过]

作者: ldm    时间: 2003-7-13 01:46
good
作者: bradzwz    时间: 2003-7-14 10:14
我下载的D瘦身版,没有Delta key (345M) --和 Delta key slim(146M)--
我怎么感觉听力没有比pp中慢多少?
作者: yongchou    时间: 2003-7-14 13:28
應該是慢的不少
請多聽一些看
作者: setsail    时间: 2003-7-14 21:59
能email给我一个吗?多谢呀!
fan_yang_8648387[在] yahoo.com
作者: redpassion    时间: 2003-7-15 04:05
后面的2个文档下载不了,呜呜~~~
请e-mail给我,谢谢
yangshanyu(A) hotmail.com
谢谢咯
作者: liqing01    时间: 2003-7-15 06:06
hey:
I also can't download the two document, may you e-mail me too?
thanks you very much!
liqing01[在] yahoo.com
作者: yongchou    时间: 2003-7-15 07:31
Ok, check your e-mail please.
(Zeros , help)
作者: setsail    时间: 2003-7-15 11:26
谢谢yongchou呀,收到了。
作者: trentonkang    时间: 2003-7-15 13:17
good
作者: agathagu    时间: 2003-7-17 23:47
天呀,有人成功了吗???怎么这么难呀,特别是对我这种电脑盲,看得不知道所云.真是负了楼主的苦心了.:(
作者: yongchou    时间: 2003-7-18 07:14
I'm sorry I can't make it more easy-looking.
But actually, it is quite easy.

Download and Install 3 programs.
Run the one for speeding-up, Transcribe, speed up the 1st of the 817wavs , save the setting.
Double-click "t.mex", and then Ctrl-A. ---------------------->Done.
---------
You can  post here what difficulties you encounter.

作者: tsljz    时间: 2003-7-25 11:34
Hi, I can't download them as well. Can you please send them to : tsljz(A) hotmail.com? Thanks a lot.
作者: simonxujin    时间: 2003-7-30 03:31
我是脑盲,能不能把安装软件发到我的油箱?simonxujin[在] yahoo.com.cn
我在德国,很快要考,但是准备得很糟糕,希望得到你们的支持!
作者: yongchou    时间: 2003-7-30 06:55
You must learn some computer skills ( very basic, don't worry) to do the speeding procedure. There's no other easy way out yet.
Sorry
作者: jq_jou    时间: 2003-8-7 07:09
标题: 可否告知哪儿可以下载DeltaKey托福摸考软件?tks
Thx.
作者: jq_jou    时间: 2003-8-7 07:37
标题: 请教哪儿有Deltakey的托福模拟考试软件下载?Tks
tks
作者: popcorn    时间: 2003-8-7 08:52
我的机子里没有Nero软件, 哪里可以找到这样的burner(free)?
作者: yongchou    时间: 2003-8-7 17:47
Use "Winiso" as said in the FAQ.
作者: abcdef    时间: 2003-8-7 23:19
I need it.  lease mail to" mymz@poetic.com".  Thank you!!
作者: yongchou    时间: 2003-8-8 08:56
請詳看第一樓
You should find them.
Besides, you need to read the article carefully before you are able to use them.
作者: jsj    时间: 2003-8-8 17:21
i can not install . my problem is when i return to transcrip and ctrl+A, there is a small box appear,the follwing file can not be located :C: list, the macro will be aborted.
what i should do?

help!!!!
作者: yongchou    时间: 2003-8-8 17:43
You must have forgotten to put the " list.txt" in C:\ (must be in the root directory)
作者: gongxi12    时间: 2003-9-29 00:07
求助阿!!
为什么我下载的345M的Deltakey解不开阿?需要密码,有谁知道密码阿?
下个星期4就考了,急死我了
作者: wallber    时间: 2003-10-10 00:01
我已经搞锭了!只要按照楼主的话做,比较容易!
作者: wallber    时间: 2003-10-10 10:32
标题: cfa考试心得
楼主真牛人也!狂感谢!用nero不行,因为新产生的ISO文件格式不能设置成原来的CDFS!但用winiso一切搞锭,试用之后狂爽!
作者: robbin23    时间: 2003-10-18 22:18
急!在线等!请各位大侠告知:楼主是不是说在Transcribe程序窗口里点击File---Open后,用Ctrl+A来选择817个wav文件?怎么我Ctrl+A不管用,即使用Shift、Ctrl来续选都不管用,只能选择一个,难道要一个一个来加速?(list文件是在c:/根目录下呀)请各位不吝赐教,感激不尽!
作者: yongchou    时间: 2003-10-18 23:51
To use "Ctrl+A" , You've got to have Macro Express( already installed).
Have you ?
作者: robbin23    时间: 2003-10-19 01:24
已经安装Macro Express,在右下角工具栏有个小人形的图标。不知是什么原因Ctrl+A不能用?Macro Express与Transcribe程序有关系吗?此处请介绍该如何操作,多谢!
作者: yongchou    时间: 2003-10-19 08:47
Let me see what might be your problem.
>>楼主是不是说在Transcribe程序窗口里点击File---Open后,用Ctrl+A

No, before using Ctrl+A ,you don't need to "File---Open" again.
All the procedures for "Transcribe" has been done in Step 2.-->
2. Run Transcribe, open "LA1-01.WAV" (MUST be this one, unless you can modify t.mex) , set the speed to 112%, click on Tools--Copy to file, check(打勾)the processing /Speed/Pitch/Tuning,
   press OK, then a small box Yes or No---> presss NO --> File--Save as --press Save.
-----------------Please make sure your step 2 is right.--------
作者: robbin23    时间: 2003-10-19 18:49
I have accomplished. Thank you very much! But I think the speed is not significantly faster.
作者: luisfigo12    时间: 2003-10-20 14:04
给我一份EMAIL
LUISFIGO1231_1980@MSN.COM
作者: wallber    时间: 2003-10-20 20:02
i speed it up to 116%, it's perfect!
作者: yongchou    时间: 2003-10-21 08:03
wallber, robbin23,

Thanks for your feedback and compliment.
Maybe, I should change the instruction on "第一樓".
I first wrote "114%". Then I felt it's a bit faster than TOEFL in the LongTalk part, though it's perfect in the Conversation part.

What is your idea ?
---------
Oh, luisfigo12

You can find download information on  第一樓


[此贴子已经被作者于2003-10-21 8:05:08编辑过]

作者: strohfus    时间: 2003-10-23 11:02
我下载了DELTA,当我想打开该软件时,它输入注册码。请问这注册码是什么。 我看好象没有人有我这样的问题,不知道为什么。
作者: strohfus    时间: 2003-10-23 11:10
标题: 谁知delta 注册码?请教斑竹。
请问这注册码是什么?谢谢!
作者: yongchou    时间: 2003-10-23 12:30
http://forum.chasedream.com/dispbbs.asp?boardID=33&ID=18201第9楼
作者: michaelh    时间: 2003-11-8 23:13
多谢yong chou 兄
请给我e-mail 一下两个小文件。
michaelhaol(A) hotmail.com
作者: lzhit    时间: 2003-11-19 00:48
I have converted all *.wav of Delta key slim into PCM, but when I run Transcribe, it shows that "No spectrum data available, select part of the waveform for spectrum analysis" Is it right? After I finish other steps, return to Transcribe program, and press Ctrl+A, nothing happens.
Who can help me? thanks a lot!
作者: erin963    时间: 2003-11-19 14:35
请问如果要加速的话会很麻烦吗?如果不麻烦谁给我发一下软件?我现在已经安装了delta了的,谢谢,bow:)




欢迎光临 ChaseDream (https://forum.chasedream.com/) Powered by Discuz! X3.3