ChaseDream
搜索
12下一页
返回列表 发新帖
00:00:00

Paint on a new airliner is usually applied in two stages: first, a coat of primer, and then a top coat. A new process requires no primer, but instead uses two layers of the same newly developed coating, with each layer of the new coating having the same thickness and weight as a traditional top coat. Using the new process instead of the old process increases the price of a new aircraft considerably.

Which of the following, if true, most strongly indicates that it is in an airline's long-term economic interest to purchase new airliners painted using the new process rather than the old process?

正确答案: B

更多相关帖子

524

帖子

15

好友

4712

积分

ChaseDream

注册时间
2003-03-17
精华
8
解析
查看: 17578|回复: 18
打印 上一主题 下一主题

PREP1-43

[复制链接]
楼主
发表于 2008-5-8 12:18:00 | 只看该作者

PREP1-43

43.   (33475-!-item-!-188;#058&006874)

 

 

Paint on a new airliner is usually applied in two stages:  first, a coat of primer, and then a top coat.  A new process requires no primer, but instead uses two layers of the same newly developed coating, with each layer of the new coating having the same thickness and weight as a traditional top coat.  Using the new process instead of the old process increases the price of a new aircraft considerably.

 

 

Which of the following, if true, most strongly indicates that it is in an airline's long-term economic interest to purchase new airliners painted using the new process rather than the old process?

 

 

(A) Although most new airliners are still painted using the old process, aircraft manufacturers now offer a purchaser of any new airliner the option of having it painted using the new process instead.

(B) A layer of primer on an airliner weighs more than a layer of the new coating would by an amount large enough to make a difference to that airliner's load-bearing capacity.

(C) A single layer of the new coating provides the aluminum skin of the airliner with less protection against corrosion than does a layer of primer of the usual thickness.

(D) Unlike the old process, the new process was originally invented for use on spacecraft, which are subject to extremes of temperature to which airliners are never exposed.

(E) Because the new coating has a viscosity similar to that of a traditional top coat, aircraft manufacturers can apply it using the same equipment as is used for a traditional top coat.

为啥选B呢?B的这句话A layer of primer on an airliner weighs more than a layer of the new coating would by an amount large enough to make a difference to that airliner's load-bearing capacity.,主谓宾是啥啊?前边有个weighs后边又出来个would


[此贴子已经被作者于2008-5-8 12:19:27编辑过]
沙发
发表于 2008-5-8 15:36:00 | 只看该作者

题目是问航空公司为什么要选择表面涂料价格更加贵的飞机(总的制造成本较高)。

B,说的是原来方法用的底漆比新的涂料要重,并且这个重量会产生一个很明显的影响,就是会降低飞机的载重能力。

板凳
发表于 2008-5-9 09:53:00 | 只看该作者

Paint on a new airliner is usually applied in two stages:  first, a coat of primer, and then a top coat.  A new process requires no primer, but instead uses two layers of the same newly developed coating, with each layer of the new coating having the same thickness and weight as a traditional top coat.  Using the new process instead of the old process increases the price of a new aircraft considerably.

 

老的飞机涂层有两层,一层primer,一层coat。新的飞机没有primer,但是有两层同样的新的coat。和老的coat同样厚同样重。使用新的涂层增加了新飞机的价格。

 

Which of the following, if true, most strongly indicates that it is in an airline's long-term economic interest to purchase new airliners painted using the new process rather than the old process?

 

(A) Although most new airliners are still painted using the old process, aircraft manufacturers now offer a purchaser of any new airliner the option of having it painted using the new process instead.

只是说新的涂层可以提供,并没有体现长期经济价值

(B) A layer of primer on an airliner weighs more than a layer of the new coating would by an amount large enough to make a difference to that airliner's load-bearing capacity.

正确,新老涂层不同对于飞机降落承受能力影响也不同,所以还是考虑用新的

(C) A single layer of the new coating provides the aluminum skin of the airliner with less protection against corrosion than does a layer of primer of the usual thickness.

说新的不如老的好,所以削弱使用新的

(D) Unlike the old process, the new process was originally invented for use on spacecraft, which are subject to extremes of temperature to which airliners are never exposed.

说新的对于飞机来说不适用,削弱使用新的

(E) Because the new coating has a viscosity similar to that of a traditional top coat, aircraft manufacturers can apply it using the same equipment as is used for a traditional top coat.

并没有体现新的长期经济效用。只是说可以通用
地板
发表于 2009-5-25 09:51:00 | 只看该作者
B说老的涂层比新的重 不是和原文这句话矛盾么?"with each layer of the new coating having the same thickness and weight as a traditional top coat”已经说明了两个一样重啊??
5#
发表于 2009-5-26 12:08:00 | 只看该作者

原文是说新的涂层和top coat一样重,而b说primer涂层比新的又重,那两层新的重量当然小于primer涂层+top coat了啊。

6#
发表于 2009-7-23 09:17:00 | 只看该作者
求解
7#
发表于 2009-12-9 00:46:55 | 只看该作者
lollypp的解释很清楚了
8#
发表于 2009-12-9 01:03:24 | 只看该作者
E:是对飞机制造商的好处,而不是对航空公司的好处;
9#
发表于 2010-3-20 16:15:40 | 只看该作者
B也没说有长期经济利益啊!
10#
发表于 2010-3-22 14:11:03 | 只看该作者
求解,B没说长期利益~
您需要登录后才可以回帖 登录 | 立即注册

Mark一下! 看一下! 顶楼主! 感谢分享! 快速回复:

手机版|ChaseDream|GMT+8, 2024-12-2 07:21
京公网安备11010202008513号 京ICP证101109号 京ICP备12012021号

ChaseDream 论坛

© 2003-2023 ChaseDream.com. All Rights Reserved.

返回顶部